How to Get Logisim Clock to Run Continuously 74163 Chip

From DP

Jump to: navigation , search

List of 7400 series digital logic integrated circuits. The SN7400 series originated with TTL integrated circuits made by Texas Instruments. Because of the popularity of these parts, they were second-sourced by other manufacturers who kept the 7400 sequence number as an aid to identification of compatible parts.

This page is (will be) a guide to our library of parts in VHDL.

Contents

• 1 Terms
• 2 Parts
  • 2.1 7400 (741G00, 7424, 7437, 7439): quad 2-input NAND gate
  • 2.2 7401 (741G01, 7403, 741G03, 7426, 7438): quad 2-input NAND gate with open collector outputs
  • 2.3 7402 (741G02, 7436): quad 2-input NOR gate
  • 2.4 7404 (741G04, 7419): hex Inverter (logic gate)
  • 2.5 7405 (741G05, 7406, 741G06, 7416): hex inverter with open collector outputs
  • 2.6 7407 (741G07, 7417, 741G17): hex buffer/driver with 30 v open collector outputs
  • 2.7 7408 (741G08, 7409, 741G09): quad 2-input AND gate
  • 2.8 7410(7412): triple 3-input NAND gate
  • 2.9 7411: triple 3-input AND gate
  • 2.10 7414 (741G14): Hex inverting Schmitt trigger
  • 2.11 7413 (74118, 7420, 7422, 7440): Four-Input NAND gate
  • 2.12 7415: triple 3-input AND gate with open collector outputs
  • 2.13 7421: dual 4-input AND gate
  • 2.14 7423 (7425): expandable dual 4-input NOR gate with strobe
  • 2.15 7427 (741G27): triple 3-input NOR gate
  • 2.16 7430: 8-input NAND gate
  • 2.17 7432 (741G32): quad 2-input OR gate
  • 2.18 7433: Quad Dual Input NOR Buffer open collector output
• 3 Not done
• 4 References

Terms

• NAND
• Open collector
• NOR
• Inverter
• AND gate
• Schmitt trigger
• OR gate
• pinout
• BCD
• Nixie tube
• Excess-3
• Gray code
• Latch
• Full adder
• Random access memory
• Magnitude comparator
• XOR gate
• Decade counter
• Shift register
• Multivibrator
• Voltage-controlled oscillator
• Demultiplexer
• Cold-cathode
• Multiplexer
• Parity bit
• Full adder
• FIFO
• Open collector
• Wallace tree
• Flip-flop
• Oscillator
• Bubble memory
• Four-phase clock
• Voltmeter
• Error detection and correction

Parts

7400 (741G00, 7424, 7437, 7439): quad 2-input NAND gate

• Datasheet

Pinout

Signal	NAND#1	NAND#2	NAND#3	NAND#4	NAND#5	NAND#6	NAND#7	NAND#8	NAND#9	NAND#10	PIN NOTES
A	40	43	2	6	13	19	22	28	31	34	data input
B	41	44	3	8	14	20	23	29	32	36	data input
Y	42	1	5	12	16	21	27	30	33	37	data output

Related parts

• 741G00: single 2-input NAND gate
• 7424: quad 2-input NAND gate gates with schmitt-trigger line-receiver inputs
• 7437: quad 2-input NAND buffer
• 7439: quad 2-input NAND buffer

7401 (741G01, 7403, 741G03, 7426, 7438): quad 2-input NAND gate with open collector outputs

• Datasheet

Pinout

Signal	NAND#1	NAND#2	NAND#3	NAND#4	NAND#5	NAND#6	NAND#7	NAND#8	NAND#9	NAND#10	PIN NOTES
A	40	43	2	6	13	19	22	28	31	34	data input
B	41	44	3	8	14	20	23	29	32	36	data input
Y	42	1	5	12	16	21	27	30	33	37	data output

Related parts

• 741G01: single 2-input NAND gate with open drain output
• 7403: quad 2-input NAND gate with open collector outputs
• 741G03: single 2-input NAND gate with open drain output
• 7426: quad 2-input NAND gate with 15 v open collector outputs
• 7438: quad 2-input NAND buffer with open collector outputs

7402 (741G02, 7436): quad 2-input NOR gate

• Datasheet

Pinout

Signal	NOR#1	NOR#2	NOR#3	NOR#4	NOR#5	NOR#6	NOR#7	NOR#8	NOR#9	NOR#10	PIN NOTES
A	40	43	2	6	13	19	22	28	31	34	data input
B	41	44	3	8	14	20	23	29	32	36	data input
Y	42	1	5	12	16	21	27	30	33	37	data output

Related parts

• 741G02: single 2-input NOR gate
• 7436: quad 2-input NOR gate (different pinout than 7402)

7404 (741G04, 7419): hex Inverter (logic gate)

• Datasheet

Pinout Table 1

Signal	INVERTER#1	INVERTER#2	INVERTER#3	INVERTER#4	INVERTER#5	INVERTER#6	INVERTER#7	PIN NOTES
A	40	2	13	22	31	41	3	data input
Y	43	6	19	28	34	44	8	data output

Pinout Table 2

Signal	INVERTER#8	INVERTER#9	INVERTER#10	INVERTER#11	INVERTER#12	INVERTER#13	INVERTER#14	INVERTER#15	PIN NOTES
A	14	23	32	42	5	16	27	33	data input
Y	20	29	36	1	12	21	30	27	data output

Related parts

• 741G04: single inverter
• 7419: hex Schmitt trigger inverter

7405 (741G05, 7406, 741G06, 7416): hex inverter with open collector outputs

• Datasheet

Pinout Table 1

Signal	INVERTER#1	INVERTER#2	INVERTER#3	INVERTER#4	INVERTER#5	INVERTER#6	INVERTER#7	PIN NOTES
A	40	2	13	22	31	41	3	data input
Y	43	6	19	28	34	44	8	data output

Pinout Table 2

Signal	INVERTER#8	INVERTER#9	INVERTER#10	INVERTER#11	INVERTER#12	INVERTER#13	INVERTER#14	INVERTER#15	PIN NOTES
A	14	23	32	42	5	16	27	33	data input
Y	20	29	36	1	12	21	30	27	data output

Related parts

• 741G05: single inverter with open drain output
• 7406: hex inverter buffer/driver with 30 v open collector outputs
• 741G06: single inverting buffer/driver with open drain output
• 7416: hex inverter buffer/driver with 15 v open collector outputs

7407 (741G07, 7417, 741G17): hex buffer/driver with 30 v open collector outputs

• Datasheet

Pinout Table 1

Signal	BUFFER#1	BUFFER#2	BUFFER#3	BUFFER#4	BUFFER#5	BUFFER#6	BUFFER#7	PIN NOTES
A	40	2	13	22	31	41	3	data input
Y	43	6	19	28	34	44	8	data output

Pinout Table 2

Signal	BUFFER#8	BUFFER#9	BUFFER#10	BUFFER#11	BUFFER#12	BUFFER#13	BUFFER#14	BUFFER#15	PIN NOTES
A	14	23	32	42	5	16	27	33	data input
Y	20	29	36	1	12	21	30	27	data output

Related parts

• 741G07: single non-inverting buffer/driver with open drain output
• 7417: hex buffer/driver with 15 v open collector outputs
• 741G17: single Schmitt-trigger buffer

7408 (741G08, 7409, 741G09): quad 2-input AND gate

• Datasheet

Pinout

Signal	AND#1	AND#2	AND#3	AND#4	AND#5	AND#6	AND#7	AND#8	AND#9	AND#10	PIN NOTES
A	40	43	2	6	13	19	22	28	31	34	data input
B	41	44	3	8	14	20	23	29	32	36	data input
Y	42	1	5	12	16	21	27	30	33	37	data output

Related parts

• 741G08: single 2-input AND gate
• 7409: quad 2-input AND gate with open collector outputs
• 741G09: single 2-input AND gate with open drain output

7410(7412): triple 3-input NAND gate

• Datasheet

Pinout

Signal	NAND#1	NAND#2	NAND#3	NAND#4	NAND#5	NAND#6	NAND#7	Notes
A	40	44	5	13	20	27	31	data input
B	41	1	6	14	21	28	32	data input
C	42	2	8	16	22	29	33	data input
Y	43	3	12	19	23	30	34	data output

Related part:

• 7412: triple 3-input NAND gate with open collector outputs

7411: triple 3-input AND gate

• Datasheet

Pinout

Signal	AND#1	AND#2	AND#3	AND#4	AND#5	AND#6	AND#7	Notes
A	40	44	5	13	20	27	31	data input
B	41	1	6	14	21	28	32	data input
C	42	2	8	16	22	29	33	data input
Y	43	3	12	19	23	30	34	data output

7414 (741G14): Hex inverting Schmitt trigger

• Datasheet

Pinout Table 1

Signal	INVERTER#1	INVERTER#2	INVERTER#3	INVERTER#4	INVERTER#5	INVERTER#6	INVERTER#7	PIN NOTES
A	40	2	13	22	31	41	3	data input
Y	43	6	19	28	34	44	8	data output

Pinout Table 2

Signal	INVERTER#8	INVERTER#9	INVERTER#10	INVERTER#11	INVERTER#12	INVERTER#13	INVERTER#14	INVERTER#15	PIN NOTES
A	14	23	32	42	5	16	27	33	data input
Y	20	29	36	1	12	21	30	27	data output

Related part:

• 741G14: single Schmitt trigger inverter

7413 (74118, 7420, 7422, 7440): Four-Input NAND gate

• Datasheet

Pinout

Signal	Pins	Notes
A		data input
B		data input
C		data input
D		data input
Y		data output

Related part:

• 7418: dual 4-input NAND gate with Schmitt trigger inputs
• 7420: dual 4-input NAND gate
• 7422: dual 4-input NAND gate with open collector outputs
• 7440: dual 4-input NAND buffer

7415: triple 3-input AND gate with open collector outputs

• Datasheet

Pinout

Signal	AND#1	AND#2	AND#3	AND#4	AND#5	AND#6	AND#7	Notes
A	40	44	5	13	20	27	31	data input
B	41	1	6	14	21	28	32	data input
C	42	2	8	16	22	29	33	data input
Y	43	3	12	19	23	30	34	data output

7421: dual 4-input AND gate

• Datasheet

Pinout

Signal	Pins	Notes
A		data input
B		data input
C		data input
D		data input
Y		data output

7423 (7425): expandable dual 4-input NOR gate with strobe

• [ Datasheet]

Pinout

Signal	Pins	Notes
A		data input
B		data input
C		data input
D		data input
Y		data output

Related Topics:

• 7425: dual 4-input NOR gate with strobe

7427 (741G27): triple 3-input NOR gate

• Datasheet

Pinout

Signal	NOR#1	NOR#2	NOR#3	NOR#4	NOR#5	NOR#6	NOR#7	Notes
A	40	44	5	13	20	27	31	data input
B	41	1	6	14	21	28	32	data input
C	42	2	8	16	22	29	33	data input
Y	43	3	12	19	23	30	34	data output

Related Topics:

• 741G27: single 3-input NOR gate

7430: 8-input NAND gate

• Datasheet

Pinout

Signal	Pins	Notes
A		data input
B		data input
C		data input
D		data input
E		data input
F		data input
G		data input
H		data input
Y		data output

7432 (741G32): quad 2-input OR gate

• Datasheet

Pinout

Signal	OR#1	OR#2	OR#3	OR#4	OR#5	OR#6	OR#7	OR#8	OR#9	OR#10	PIN NOTES
A	40	43	2	6	13	19	22	28	31	34	data input
B	41	44	3	8	14	20	23	29	32	36	data input
Y	42	1	5	12	16	21	27	30	33	37	data output

Related Topics:

• 741G32: single 2-input OR gate

7433: Quad Dual Input NOR Buffer open collector output

• [ Datasheet]

Pinout

Signal	NOR#1	NOR#2	NOR#3	NOR#4	NOR#5	NOR#6	NOR#7	NOR#8	NOR#9	NOR#10	PIN NOTES
A	40	43	2	6	13	19	22	28	31	34	data input
B	41	44	3	8	14	20	23	29	32	36	data input
Y	42	1	5	12	16	21	27	30	33	37	data output

Not done

• 7431: hex delay elements
• 7441: binary-coded decimal|BCD to decimal decoder/Nixie tube driver
• 7442: BCD to decimal decoder
• 7443: excess-3 to decimal decoder
• 7444: excess-3-Gray code to decimal decoder
• 7445: BCD to decimal decoder/driver
• 7446: BCD to seven-segment display decoder/driver with 30 v open collector outputs
• 7447: BCD to 7-segment decoder/driver with 15 v open collector outputs
• 7448: BCD to 7-segment decoder/driver with Internal Pullups
• 7449: BCD to 7-segment decoder/driver with open collector outputs
• 7450: dual 2-wide 2-input AND-OR-invert gate (one gate expandable)
• 7451: dual 2-wide 2-input AND-OR-invert gate
• 7452: expandable 4-wide 2-input AND-OR gate
• 7453: expandable 4-wide 2-input AND-OR-invert gate
• 7454: 4-wide 2-input AND-OR-invert gate
• 7455: 2-wide 4-input AND-OR-invert Gate (74H version is expandable)
• 7456: 50:1 frequency divider
• 7457: 60:1 frequency divider
• 7458: 2-input & 3-input AND-OR Gate
• 7459: 2-input & 3-input AND-OR-invert Gate
• 7460: dual 4-input expander
• 7461: triple 3-input expander
• 7462: 3-2-2-3-input AND-OR expander
• 7463: hex current sensing interface gates
• 7464: 4-2-3-2-input AND-OR-invert gate
• 7465: 4-2-3-2 input AND-OR-invert gate with open collector output
• 7468: dual 4 bit decade counters
• 7469: dual 4 bit binary counters
• 7470: AND-gated positive edge triggered J-K Flip-flop (electronics)|flip-flop with preset and clear
• 74H71: AND-or-gated J-K master-slave flip-flop with preset
• 74L71: AND-gated R-S master-slave flip-flop with preset and clear
• 7472: AND gated J-K master-slave flip-flop with preset and clear
• 7473: dual J-K flip-flop with clear
• 7474: dual D positive edge triggered flip-flop with preset and clear
• 7475: 4-bit bistable latch (electronic)|latch
• 7476: dual J-K flip-flop with preset and clear
• 7477: 4-bit bistable latch
• 74H78: dual positive pulse triggered J-K flip-flop with preset, common clock, and common clear (different pinout than 74L78 / 74Ls78)
• 74L78: dual positive pulse triggered J-K flip-flop with preset, common clock, and common clear
• 74Ls78: dual negative edge triggered J-K flip-flop with preset, common clock, and common clear
• 7479: dual D flip-flop
• 741G79: single D-type flip-flop positive edge trigger non-inverting output
• 7480: gated full adder
• 741G80: single D-type flip-flop positive edge trigger inverting output
• 7481: 16-bit random access memory|random access memory
• 7482: 2-bit binary full adder
• 7483: 4-bit binary full adder
• 7484: 16-bit random access memory
• 7485: 4-bit digital comparator|magnitude comparator
• 7486: quad 2-input XOR gate
• 741G86: single 2 input exclusive-OR gate
• 7487: 4-bit true/complement/zero/one element
• 7488: 256-bit read-only memory
• 7489: 64-bit random access memory
• 7490: counter#decade_counter|decade counter (separate divide-by-2 and divide-by-5 sections)
• 7491: 8-bit shift register, serial In, serial out, gated input
• 7492: divide-by-12 counter (separate divide-by-2 and divide-by-6 sections)
• 7493: 4-bit binary counter (separate divide-by-2 and divide-by-8 sections)
• 7494: 4-bit shift register, dual asynchronous presets
• 7495: 4-bit shift register, parallel In, parallel out, serial input
• 7496: 5-bit parallel-In/parallel-out shift register, asynchronous preset
• 7497: synchronous 6-bit binary rate multiplier
• 741G97: configurable multiple-function gate
• 7498: 4-bit data selector/storage register
• 7499: 4-bit bidirectional universal shift register
• 74100: dual 4-bit bistable latch
• 74101: AND-or-gated J-K negative-edge-triggered flip-flop with preset
• 74102: AND-gated J-K negative-edge-triggered flip-flop with preset and clear
• 74103: dual J-K negative-edge-triggered flip-flop with clear
• 74104: J-K master-slave flip-flop
• 74105: J-K master-slave flip-flop
• 74106: dual J-K negative-edge-triggered flip-flop with preset and clear
• 74107: dual J-K flip-flop with clear
• 74107a: dual J-K negative-edge-triggered flip-flop with clear
• 74108: dual J-K negative-edge-triggered flip-flop with preset, common clear, and common clock
• 74109: dual J-Not-K positive-edge-triggered flip-flop with clear and preset
• 74110: AND-gated J-K master-slave flip-flop with data lockout
• 74111: dual J-K master-slave flip-flop with data lockout
• 74112: dual J-K negative-edge-triggered flip-flop with clear and preset
• 74113: dual J-K negative-edge-triggered flip-flop with preset
• 74114: dual J-K negative-edge-triggered flip-flop with preset, common clock and clear
• 74116: dual 4-bit latch with clear
• 74118: hex set/reset latch
• 74119: hex set/reset latch
• 74120: dual pulse synchronizer/drivers
• 74121: monostable multivibrator
• 74122: retriggerable monostable multivibrator with clear
• 74123: dual retriggerable monostable multivibrator with clear
• 741G123: single retriggerable monostable multivibrator with clear
• 74124: dual voltage-controlled oscillator
• 74125: quad bus buffer with three-state outputs, negative enable
• 741G125: buffer/Line driver, three-state output with active low output enable
• 74126: quad bus buffer with three-state outputs, positive enable
• 74128: quad 2-input NOR Line driver
• 741G126: buffer/line driver, three-state output with active high output enable
• 74130: quad 2-input AND gate buffer with 30 v open collector outputs
• 74131: quad 2-input AND gate buffer with 15 v open collector outputs
• 74132: quad 2-input NAND schmitt trigger
• 74133: 13-input NAND gate
• 74134: 12-input NAND gate with three-state output
• 74135: quad exclusive-or/NOR gate
• 74136: quad 2-input XOR gate with open collector outputs
• 74137: 3 to 8-line decoder/demultiplexer with address latch
• 74138: 3 to 8-line decoder/demultiplexer
• 74139: dual 2 to 4-line decoder/demultiplexer
• 74140: dual 4-input NAND line driver
• 74141: BCD to decimal decoder/driver FOR cold-cathode indicator/Nixie tube
• 74142: decade counter/latch/decoder/driver for Nixie tubes
• 74143: decade counter/latch/decoder/7-segment driver, 15 ma constant current
• 74144: decade counter/latch/decoder/7-segment driver, 15 v open collector outputs
• 74145: BCD to decimal decoder/driver
• 74147: 10-line to 4-line priority encoder
• 74148: 8-line to 3-line priority encoder
• 74150: 16-line to 1-line data selector/multiplexer
• 74151: 8-line to 1-line data selector/multiplexer
• 74152: 8-line to 1-line data selector/multiplexer
• 74153: dual 4-line to 1-line data selector/multiplexer
• 74154: 4-line to 16-line decoder/demultiplexer
• 74155: dual 2-line to 4-line decoder/demultiplexer
• 74156: dual 2-line to 4-line decoder/demultiplexer with open collector outputs
• 74157: quad 2-line to 1-line data selector/multiplexer, noninverting
• 74158: quad 2-line to 1-line data selector/multiplexer, inverting
• 74159: 4-line to 16-line decoder/demultiplexer with open collector outputs
• 74160: synchronous 4-bit decade counter with asynchronous clear
• 74161: synchronous 4-bit binary counter with asynchronous clear
• 74162: synchronous 4-bit decade counter with synchronous clear
• 74163: synchronous 4-bit binary counter with synchronous clear
• 74164: 8-bit parallel-out serial shift register with asynchronous clear
• 74165: 8-bit serial shift register, parallel Load, complementary outputs
• 74166: parallel-Load 8-bit shift register
• 74167: synchronous decade rate multiplier
• 74168: synchronous 4-bit up/down decade counter
• 74169: synchronous 4-bit up/down binary counter
• 74170: 4 by 4 register file with open collector outputs
• 74172: 16-bit multiple port register file with three-state outputs
• 74173: quad d flip-flop with three-state outputs
• 74174: hex d flip-flop with common clear
• 74175: quad d edge-triggered flip-flop with complementary outputs and asynchronous clear
• 74176: presettable decade (bi-quinary) counter/latch
• 74177: presettable binary counter/latch
• 74178: 4-bit parallel-access shift register
• 74179: 4-bit parallel-access shift register with asynchronous clear and complementary Q_d outputs
• 74180: 9-bit odd/even parity bit generator and checker
• 74181: 4-bit arithmetic logic unit and function generator
• 74182: lookahead carry generator
• 74183: dual carry-save full adder
• 74184: BCD to binary converter
• 74185: binary to BCD converter
• 74186: 512-bit (64x8) read-only memory with open collector outputs
• 74187: 1024-bit (256x4) read only memory with open collector outputs
• 74188: 256-bit (32x8) programmable read-only memory with open collector outputs
• 74189: 64-bit (16x4) ram with inverting three-state outputs
• 74190: synchronous up/down decade counter
• 74191: synchronous up/down binary counter
• 74192: synchronous up/down decade counter with clear
• 74193: synchronous up/down binary counter with clear
• 74194: 4-bit bidirectional universal shift register
• 74195: 4-bit parallel-access shift register
• 74196: presettable decade counter/latch
• 74197: presettable binary counter/latch
• 74198: 8-bit bidirectional universal shift register
• 74199: 8-bit bidirectional universal shift register with J-Not-K serial inputs
• 74200: 256-bit ram with three-state outputs
• 74201: 256-bit (256x1) ram with three-state outputs
• 74206: 256-bit ram with open collector outputs
• 74209: 1024-bit (1024x1) ram with three-state output
• 74210: octal buffer
• 74219: 64-bit (16x4) ram with noninverting three-state outputs
• 74221: dual monostable multivibrator with schmitt trigger input
• 74222: 16 by 4 synchronous FIFO memory with three-state outputs
• 74224: 16 by 4 synchronous FIFO memory with three-state outputs
• 74225: asynchronous 16x5 FIFO memory
• 74226: 4-bit parallel latched bus transceiver with three-state outputs
• 74230: octal buffer/driver with three-state outputs
• 74232: quad NOR Schmitt trigger
• 74237: 1-of-8 decoder/demultiplexer with address latch, active high outputs
• 74238: 1-of-8 decoder/demultiplexer, active high outputs
• 74239: dual 2-of-4 decoder/demultiplexer, active high outputs
• 74240: octal buffer with Inverted three-state outputs
• 74241: octal buffer with noninverted three-state outputs
• 74242: quad bus transceiver with Inverted three-state outputs
• 74243: quad bus transceiver with noninverted three-state outputs
• 74244: octal buffer with noninverted three-state outputs
• 74245: octal bus transceiver with noninverted three-state outputs
• 74246: BCD to 7-segment decoder/driver with 30 v open collector outputs
• 74247: BCD to 7-segment decoder/driver with 15 v open collector outputs
• 74248: BCD to 7-segment decoder/driver with Internal Pull-up outputs
• 74249: BCD to 7-segment decoder/driver with open collector outputs
• 74251: 8-line to 1-line data selector/multiplexer with complementary three-state outputs
• 74253: dual 4-line to 1-line data selector/multiplexer with three-state outputs
• 74255: dual 4-bit addressable latch
• 74256: dual 4-bit addressable latch
• 74257: quad 2-line to 1-line data selector/multiplexer with noninverted three-state outputs
• 74258: quad 2-line to 1-line data selector/mulitplexer with Inverted three-state outputs
• 74259: 8-bit addressable latch
• 74260: dual 5-input NOR gate
• 74261: 2-bit by 4-bit parallel binary multiplier
• 74265: quad complementary output elements
• 74266: quad 2-input XNOR gate with open collector|open collectoroutputs
• 74270: 2048-bit (512x4) read only memory with open collector outputs
• 74271: 2048-bit (256x8) read only memory with open collector outputs
• 74273: 8-bit register with reset
• 74274: 4-bit by 4-bit binary multiplier
• 74275: 7-bit slice Wallace tree
• 74276: quad J-Not-K edge-triggered Flip-flop (electronics)|Flip-Flops with separate clocks, common preset and clear
• 74278: 4-bit cascadeable priority registers with latched data inputs
• 74279: quad set-reset latch
• 74280: 9-bit odd/even Parity bit Generator/checker
• 74281: 4-bit parallel binary accumulatOR
• 74283: 4-bit binary Full adder
• 74284: 4-bit by 4-bit parallel binary multiplier (low order 4 bits of product)
• 74285: 4-bit by 4-bit parallel binary multiplier (high order 4 bits of product)
• 74287: 1024-bit (256x4) programmable read-only memory with three-state outputs
• 74288: 256-bit (32x8) programmable read-only memory with three-state outputs
• 74289: 64-bit (16x4) RAM with open collector outputs
• 74290: decade counter (separate divide-by-2 and divide-by-5 sections)
• 74291: 4-bit universal shift register, binary up/down counter, synchronous
• 74292: programmable frequency divider/digital timer
• 74293: 4-bit binary counter (separate divide-by-2 and divide-by-8 sections)
• 74294: programmable frequency divider/digital timer
• 74295: 4-bit bidirectional register with three-state outputs
• 74297: digital phase-locked-loop filter
• 74298: quad 2-input multiplexer with storage
• 74299: 8-bit bidirectional universal shift/storage register with three-state outputs
• 74301: 256-bit (256x1) random access memory with open collector output
• 74309: 1024-bit (1024x1) random access memory with open collector output
• 74310: octal buffer with Schmitt trigger inputs
• 74314: 1024-bit random access memory
• 74320: crystal controlled crystal oscillator|oscillator
• 74322: 8-bit shift register with sign extend, three-state outputs
• 74323: 8-bit bidirectional universal shift/storage register with three-state outputs
• 74324: voltage controlled oscillator (OR crystal controlled)
• 74340: octal buffer with Schmitt trigger inputs and three-state inverted outputs
• 74341: octal buffer with Schmitt trigger inputs and three-state noninverted outputs
• 74344: octal buffer with Schmitt trigger inputs and three-state noninverted outputs
• 74348: 8 to 3-line priority encoder with three-state outputs
• 74350: 4-bit shifter with three-state outputs
• 74351: dual 8-line to 1-line data selectors/multiplexers with three-state outputs and 4 common data inputs
• 74352: dual 4-line to 1-line data selectors/multiplexers with inverting outputs
• 74353: dual 4-line to 1-line data selectors/multiplexers with inverting three-state outputs
• 74354: 8 to 1-line data selector/multiplexer with transparent latch, three-state outputs
• 74356: 8 to 1-line data selector/multiplexer with edge-triggered register, three-state outputs
• 74361: bubble memory function timing generator
• 74362: clock signal#4-phase clock | four-phase clock generator/driver
• 74365: hex buffer with noninverted three-state outputs
• 74366: hex buffer with Inverted three-state outputs
• 74367: hex buffer with noninverted three-state outputs
• 74368: hex buffer with Inverted three-state outputs
• 74370: 2048-bit (512x4) read-only memory with three-state outputs
• 74371: 2048-bit (256x8) read-only memory with three-state outputs
• 74373: octal transparent latch with three-state outputs
• 741G373: single transparent latch with three-state output
• 74374: octal register with three-state outputs
• 741G374: single d-type flip-flop with three-state output
• 74375: quad bistable latch
• 74376: quad J-Not-K flip-flop with common clock and common clear
• 74377: 8-bit register with clock enable
• 74378: 6-bit register with clock enable
• 74379: 4-bit register with clock enable and complementary outputs
• 74380: 8-bit multifunction register
• 74381: 4-bit arithmetic logic unit/function generator with generate and propagate outputs
• 74382: 4-bit arithmetic logic unit/function generator with ripple carry and overflow outputs
• 74385: quad 4-bit adder/subtractor
• 74386: quad 2-input XOR gate
• 74387: 1024-bit (256x4) programmable read-only memory with open collector outputs
• 74388: 4-bit register with standard and three-state outputs
• 74390: dual 4-bit decade counter
• 74393: dual 4-bit binary counter
• 74395: 4-bit universal shift register with three-state outputs
• 74398: quad 2-input mulitplexers with storage and complementary outputs
• 74399: quad 2-input mulitplexer with storage
• 74408: 8-bit parity bit|parity tree
• 74412: multi-mode buffered 8-bit latches with three-state outputs and clear
• 74423: dual retriggerable monostable multivibrator
• 74424: two-phase clock generator/driver
• 74425: quad gates with three-state outputs and active low enables
• 74426: quad gates with three-state outputs and active high enables
• 74428: system controller for 8080a
• 74438: system controller for 8080a
• 74440: quad tridirectional bus transceiver with noninverted open collector outputs
• 74441: quad tridirectional bus transceiver with Inverted open collector outputs
• 74442: quad tridirectional bus transceiver with noninverted three-state outputs
• 74443: quad tridirectional bus transceiver with Inverted three-state outputs
• 74444: quad tridirectional bus transceiver with Inverted and noninverted three-state outputs
• 74448: quad tridirectional bus transceiver with Inverted and noninverted open collector outputs
• 74450: 16-to-1 multiplexer with complementary outputs
• 74451: dual 8-to-1 multiplexer
• 74452: dual decade counter, synchronous
• 74453: dual binary counter, synchronous
• 74453: quad 4-to-1 multiplexer
• 74454: dual decade up/down counter, synchronous, preset input
• 74455: dual binary up/down counter, synchronous, preset input
• 74456: NBCD (Natural binary coded decimal) adder
• 74460: bus transfer switch
• 74461: 8-bit presettable binary counter with three-state outputs
• 74462: fiber-optic link transmitter
• 74463: fiber-optic link receiver
• 74465: octal buffer with three-state outputs
• 74468: dual mos-to-ttL level converter
• 74470: 2048-bit (256x8) programmable read-only memory with open collector outputs
• 74471: 2048-bit (256x8) programmable read-only memory with three-state outputs
• 74472: programmable read-only memory with open collector outputs
• 74473: programmable read-only memory with three-state outputs
• 74474: programmable read-only memory with open collector outputs
• 74475: programmable read-only memory with three-state outputs
• 74481: 4-bit slice processor elements
• 74482: 4-bit slice expandable control elements
• 74484: BCD-to-binary converter
• 74485: binary-to-BCD converter
• 74490: dual decade counter
• 74491: 10-bit binary up/down counter with limited preset and three-state outputs
• 74498: 8-bit bidirectional shift register with parallel inputs and three-state outputs
• 74508: 8-bit multiplier/divider
• 74520: 8-bit comparator
• 74521: 8-bit comparator
• 74526: fuse programmable identity comparator, 16 bit
• 74527: fuse programmable identity comparator, 8 bit + 4 bit conventional Identity comparator
• 74528: fuse programmable Identity comparator, 12 bit
• 74531: octal transparent latch with 32 ma three-state outputs
• 74532: octal register with 32 ma three-state outputs
• 74533: octal transparent latch with inverting three-state Logic outputs
• 74534: octal register with inverting three-state outputs
• 74535: octal transparent latch with inverting three-state outputs
• 74536: octal register with inverting 32 ma three-state outputs
• 74537: BCD to decimal decoder with three-state outputs
• 74538: 1 of 8 decoder with three-state outputs
• 74539: dual 1 of 4 decoder with three-state outputs
• 74540: inverting octal buffer with three-state outputs
• 74541: non-inverting octal buffer with three-state outputs
• 74558: 8-bit by 8-bit multiplier with three-state outputs
• 74560: 4-bit decade counter with three-state outputs
• 74561: 4-bit binary counter with three-state outputs
• 74563: 8-bit d-type transparent latch with inverting three-state outputs
• 74564: 8-bit d-type edge-triggered register with inverting three-state outputs
• 74568: decade up/down counter with three-state outputs
• 74569: binary up/down counter with three-state outputs
• 74573: octal D-type transparent latchwith three-state outputs
• 74574: octal D-type edge-triggered flip-flop with three-state outputs
• 74575: octal D-type flip-flop with synchronous clear, three-state outputs
• 74576: octal D-type flip-flop with inverting three-state outputs
• 74577: octal D-type flip-flop with synchronous clear, inverting three-state outputs
• 74580: octal transceiver/latch with inverting three-state outputs
• 74589: 8-bit shift register with input latch, three-state outputs
• 74590: 8-bit binary counter with output registers and three-state outputs
• 74592: 8-bit binary counter with input registers
• 74593: 8-bit binary counter with input registers and three-state outputs
• 74594: serial-in shift register with output registers
• 74595: serial-in shift register with output latches
• 74596: serial-in shift register with output registers and open collector outputs
• 74597: serial-out shift register with input latches
• 74598: shift register with input latches
• 74600: dynamic memory refresh controller, transparent and burst modes, for 4K or 16K drams
• 74601: dynamic memory refresh controller, transparent and burst modes, for 64K drams
• 74602: dynamic memory refresh controller, cycle steal and burst modes, for 4K or 16K drams
• 74603: dynamic memory refresh controller, cycle steal and burst modes, for 64K drams
• 74604: octal 2-input multiplexer with latch, high-speed, with three-state outputs
• 74605: octal 2-input mulitplexer with |latch, high-speed, with open collector outputs
• 74606: octal 2-input mulitplexer with latch, glitch-free, with three-state outputs
• 74607: octal 2-input mulitplexer with latch, glitch-free, with open collector outputs
• 74608: memory cycle controller
• 74610: memory mapper, latched, three-state outputs
• 74611: memory mapper, latched, open collector outputs
• 74612: memory mapper, three-state outputs
• 74613: memory mapper, open collector outputs
• 74620: octal bus transceiver, inverting, three-state outputs
• 74621: octal bus transceiver, noninverting, open collector outputs
• 74622: octal bus transceiver, inverting, open collector outputs
• 74623: octal bus transceiver, noninverting, three-state outputs
• 74624: voltage-controlled oscillator with enable control, range control, two-phase outputs
• 74625: dual voltage-controlled oscillator with two-phase outputs
• 74626: dual voltage-controlled oscillator with enable control, two-phase outputs
• 74627: dual voltage-controlled oscillator
• 74628: voltage-controlled oscillator with enable control, range control, external temperature compensation, and two-phase outputs
• 74629: dual voltage-controlled oscillator with enable control, range control
• 74630: 16-bit error detection and correction (EDAC) with three-state outputs
• 74631: 16-bit error detection and correction with open collector outputs
• 74632: 32-bit error detection and correction
• 74638: octal bus transceiver with inverting three-state outputs
• 74639: octal bus transceiver with noninverting three-state outputs
• 74640: octal bus transceiver with inverting three-state outputs
• 74641: octal bus transceiver with noninverting open collector outputs
• 74642: octal bus transceiver with inverting open collector outputs
• 74643: octal bus transceiver with mix of inverting and noninverting three-state outputs
• 74644: octal bus transceiver with mix of inverting and noninverting open collector outputs
• 74645: octal bus transceiver
• 74646: octal bus transceiver/latch/multiplexer with noninverting three-state outputs
• 74647: octal bus transceiver/latch/multiplexer with noninverting open collector outputs
• 74648: octal bus transceiver/latch/multiplexer with inverting three-state outputs
• 74649: octal bus transceiver/latch/multiplexer with inverting open collector outputs
• 74651: octal bus transceiver/register with inverting three-state outputs
• 74652: octal bus transceiver/register with noninverting three-state outputs
• 74653: octal bus transceiver/register with inverting three-state and open collector outputs
• 74654: octal bus transceiver/register with noninverting three-state and open collector outputs
• 74658: octal bus transceiver with Parity, inverting
• 74659: octal bus transceiver with Parity, noninverting
• 74664: octal bus transceiver with Parity, inverting
• 74665: octal bus transceiver with Parity, noninverting
• 74668: synchronous 4-bit decade Up/down counter
• 74669: synchronous 4-bit binary Up/down counter
• 74670: 4 by 4 register File with three-state outputs
• 74671: 4-bit bidirectional shift register/latch /multiplexer with three-state outputs
• 74672: 4-bit bidirectional shift register/latch/multiplexer with three-state outputs
• 74673: 16-bit serial-in serial-out shift register with output storage registers, three-state outputs
• 74674: 16-bit parallel-in serial-out shift register with three-state outputs
• 74677: 16-bit address comparator with enable
• 74678: 16-bit address comparatOR with latch
• 74679: 12-bit address comparatOR with latch
• 74680: 12-bit address comparatOR with enable
• 74681: 4-bit parallel binary accumulatOR
• 74682: 8-bit digital comparator|magnitude comparator
• 74683: 8-bit magnitude comparatOR with open collector outputs
• 74684: 8-bit magnitude comparatOR
• 74685: 8-bit magnitude comparatOR with open collector outputs
• 74686: 8-bit magnitude comparatOR with enable
• 74687: 8-bit magnitude comparatOR with enable
• 74688: 8-bit equality comparatOR
• 74689: 8-bit magnitude comparatOR with open collector outputs
• 74690: 4-bit decimal counter/latch/multiplexer with asynchronous reset, |three state outputs
• 74691: 4-bit binary counter/latch/multiplexer with asynchronous reset, three-state outputs
• 74692: 4-bit decimal counter/latch/multiplexer with synchronous reset, three-state outputs
• 74693: 4-bit binary counter/latch/multiplexer with synchronous reset, three-state outputs
• 74694: 4-bit decimal counter/latch/multiplexer with synchronous and asynchronous resets, three-state outputs
• 74695: 4-bit binary counter/latch/multiplexer with synchronous and asynchronous resets, three-state outputs
• 74696: 4-bit decimal counter/register/multiplexer with asynchronous reset, three-state outputs
• 74697: 4-bit binary counter/register/multiplexer with asynchronous reset, three-state outputs
• 74698: 4-bit decimal counter/register/multiplexer with synchronous reset, three-state outputs
• 74699: 4-bit binary counter/register/multiplexer with synchronous reset, three-state outputs
• 74716: programmable decade counter
• 74718: programmable binary counter
• 74724: voltage controlled multivibratOR
• 74740: octal buffer/Line driver, inverting, three-state outputs
• 74741: octal buffer/Line driver, noninverting, three-state outputs, mixed enable polarity
• 74744: octal buffer/Line driver, noninverting, three-state outputs
• 74748: 8 to 3-line priority encoder
• 74779: 8-bit bidirectional binary counter (3-state)
• 74783: synchronous address mulitplexer
• 74790: error detection and correction (EDAC)
• 74794: 8-bit register with readback
• 74795: octal buffer with three-state outputs
• 74796: octal buffer with three-state outputs
• 74797: octal buffer with three-state outputs
• 74798: octal buffer with three-state outputs
• 74804: hex 2-input NAND drivers
• 74805: hex 2-input NOR drivers
• 74808: hex 2-input AND drivers
• 74832: hex 2-input OR drivers
• 74848: 8 to 3-line priority encoder with three-state outputs
• 74873: octal transparent latch
• 74874: octal d-type flip-flop
• 74876: octal d-type flip-flop with inverting outputs
• 74878: dual 4-bit d-type flip-flop with synchronous clear, noninverting three-state outputs
• 74879: dual 4-bit d-type flip-flop with synchronous clear, inverting three-state outputs
• 74880: octal transparent latchwith inverting outputs
• 74882: 32-bit lookahead carry generator
• 74888: 8-bit slice processor
• 74926: 4-digit counter/display driver
• 74935: 3.5-digit digital voltmeter (DVM) support chip for multiplexed 7-segment displays
• 74936: 3.75-digit digital voltmeter (DVM) support chip for multiplexed 7-segment displays
• 741005: hex inverting buffer with open-collector output
• 741035: hex noninverting buffers with open-collector outputs
• 742960: error detection and correction (EDAC)
• 742961: edac bus buffer, inverting
• 742962: edac bus buffer, noninverting
• 742968: dynamic memory controller
• 742969: memory timing controller for use with error detection and correction| EDAC
• 742970: memory timing controller for use without EDAC
• 741G3208: single 3 input OR-AND Gate;
• 744002: dual 4-input NOR gate
• 744015: dual 4-bit shift registers
• 744017: 5-stage ÷10 Johnson counter
• 744020: 14-stage binary counter
• 744024: 7 stage ripple carry binary counter
• 744028: BCD to decimal decoder
• 744040: 12-stage binary ripple counter
• 744046: phase-locked loop and voltage-controlled oscillator
• 744049: hex inverting buffer
• 744050: hex buffer/converter (non-inverting)
• 744051: high-speed CMOS 8-channel analog mulitplexer/demultiplexer
• 744052: dual 4-channel analog multiplexer/demultiplexers
• 744053: triple 2-channel analog multiplexer/demultiplexers
• 744059: programmable divide-by-N counter
• 744060: 14-stage binary ripple counter with oscillator
• 744066: quad bilateral switches
• 744067: 16-channel analog multiplexer/demultiplexer
• 744075: triple 3-input OR gate
• 744078: 8-input OR/NOR gate
• 744094: 8-bit three-state shift register/latch
• 744316: quad analog switch
• 744511: BCD to 7-segment decoder
• 744520: dual 4-bit synchronous binary counter
• 744538: dual retriggerable precision monostable multivibrator
• 747007: hex buffer
• 747266: quad 2-input XNOR gate
• 7429841: 10-bit bus-interface D-type latch with 3-state outputs
• 7440103: presettable 8-bit synchronous down counter
• 7440105: 4-bit by 16-word FIFO register

References

• Original list and some text taken from Wikipedia (CC-BY-SA)

dullwored1953.blogspot.com

Source: http://dangerousprototypes.com/docs/7400_series_library_in_VHDL

Share this post